- White exhaust fumes
The exhaust gas becomes a benchmark indicating the engine condition. If the car smoke is white, then certainly there is oil that burned during the step of the machine business. The oil may enter through the intake manifold or enter from the crank room due to wear and tear cylinder.
Cylinder wear is what causes the engine to be dismantled because the location of the cylinder is in the central part of the machine. The solution to this problem is OS (Oversize) or redecoration.
- Difficult start in the morning
The next feature, namely when the machine is difficult to turn on, especially in the morning or when the engine conditions cold. This problem arises because of the small compression pressure of the machine. So when the engine temperature is still cold, the resulting compression pressure is not able to burn diesel fuel injected during the business step. Usually, the machine will live after going through several times cranking process, can be 5 to 7 times start.
We know that the diesel engine has a fairly high compression pressure. This value is certainly not without reason, as a self-combustion engine diesel engine must have a high compression temperature. This decrease can be caused by leakage of compression through the sidelines of the piston (because of cylinder wear) or because of spark plugs.
Therefore, before disassembling the engine it is better to check the glow plug as a heating of the combustion chamber. More can you read on truck air conditioning repair Tacoma
- Engine power is reduced / demos
The third characteristic is also related to the problem of cylinder wear. The feature that will be felt, the machine will experience loss power. This will be felt when the car runs in the mountain area Engine power suddenly reduced. The problem of engine loss power can indeed be caused by many components. But when this problem is followed by the two previous traits, we can be sure the machine must be dismantled.
- Engine oil is often reduced
As the engine traits have to go down the first machine, white smoke on the exhaust indicates there is oil burning in the combustion process. If you frequently check oil stick, then the engine oil condition will be reduced. Reduced engine oil can be caused by leaks at some point. But for engine oil leaks that require the engine to decrease, usually followed by the three traits above.
- Engine sound becomes rougher
For the last feature, will be heard from the sound of the machine itself. The sound of the engine indicating a problem at the core of the engine will sound rougher. The previously clean and quiet engine will turn into a smoky engine with a rougher sound. This may indicate signs of wear and tear on some bearings to machine parts that are outside the range of life.
To check which components have the potential to make your car engine sound rough, can listen to the following article: truck air conditioning repair Tacoma
If the above traits have been seen in your diesel, then the next step the machine must have dismantled or down the machine. To do this work, you can do it through professional workshops that are known to have good quality.
The reason this job can be at risk of damaging other components if not done properly.
The cost you have to spend also varies depending on the type of damage to your diesel engine.
Thus the full article on the characteristics – features of diesel engines should come down the machine may be able to increase our insight and useful for us all.